Production Soldering System — Tip Hand-piece
PS-900
Description
The PS-900 packs power and provides exceptional thermal control into a small benchtop footprint.
Features and Benefits:
-SmartHeat® temperature control
-Ergonomic, lightweight handle
-Rugged cast aluminum housing
-Added plating thickness to tips
-Low cost, quick-change heater coil
Product Comprises of:
-PS-PW900 : Power Supply
-PS-HC3 : Hand-piece with long cord with Coil Assembly
-SFV-CH15A : Chisel soldering tip 1.5mm (.06″)
-WS2-NS : Workstand
-AC-CP2 : Tip removal pad
Tips / Cartridges Series compatible with this system:
-SxV Soldering Tips
-CxV Blade Tips
Technical Specification
Power Supply:
| Output Frequency: | 450 KHz |
| Output Power: | 60 Watts max. at 22°C ambient temperature |
| Power Consumption: | 90 Watts max. |
| Input Line Frequency: | 50/60 Hz |
| Input Line Voltage: | 100 – 240 VAC |
| Maximum Enclosure Temperature: | 65°C |
| Ambient Operating Temperature: | 10 – 40°C |
| Power Cord (3-wire): | 274 cm 18/3 SJT |
| Dimensions W x D x H: | 80 x 160 x 115 mm (3.1″ x 6.3″ x 4.5″) |
Soldering Handle and Coil Assembly:
| Tip to grip: | 58 mm (2.28″) |
| Grip diameter: | 13 mm (0.51″) |
| Overall length (with tip): | 230 mm (9.06″) with standard tips Connector 3-pin power connector |
| Handle Cord Assembly Length: | 122 cm – burn proof, ESD safe |
| Idle Temperature Repeatability: | ± 1.1°C in still air |
| Tip-to-Ground Resistance: | < 2 ohms |
| Tip-to-Ground Potential: | < 2 mV |
| Tip shaft diameter: | 8.0 mm (0.31″) |
| Tip length: | 82 mm (3.23″) to 93 mm (3.66″) (typical) |
| Workstand W x D x H: | 105 x 175 x 90 mm (4.1″ x 6.9″ x 3.5″) |
