Simgle Output Soldering and Rework System — Cartridge Hand-piece
MFR-1120
Description
The MFR-1100 Single Output Series is a highly versatile unit that is available with either a soldering/blade tips, soldering/rework cartridges or tweezer hand-piece. The MFR-1120 includes a solder/blade tip hand-piece (MFR-H2-ST2) and a workstand. See below for the list of tips available for the MFR-1120. Other accessories are also available.
Features and Benefits:
-SmartHeat® Technology includes a microprocessor controlled heating system that operates at lower temperatures and eliminates calibration time. .
-MFR-1100 units are designed for use with 5 different hand-pieces, including a desoldering option.
-Each hand-piece has a large variety of cartridges and Tips for maximum flexibility
-Ergonomic hand-piece helps ensure operator safety and comfort
-Small bench top footprint
-Can be combined with the MFR-2200 Dual Output Series for additional application options.
Product Comprises of:
-MFR-PS1100 : MFR Single Output Power Supply
-MFR-H2-ST2 : Tip Soldering Hand-piece for the MFR Series
-WS1 : Soldering Workstand, Compatible with MFR-H2-ST2 Hand-piece
NOTE: Tips/Cartridges sold separately.
Tips / Cartridges Series compatible with this system:
-SxV Soldering Tips
-CxV Blade Tips
Technical Specification
Power Supply
| Ambient Operating Temperature: | 10 – 40°C (50°F – 104°F) |
| Maximum Enclosure Temperature: | 55°C (131°F) |
| Input Line Voltage: | 100 – 240 VAC |
| Input Line Frequency: | 50/60 Hz grounded circuit |
| Power Consumption: | 65 Watts maximum |
| Output Power: | 60 Watts maximum |
| Output Frequency: | 450 KHz |
| Power Cord: | (3-wire) 183 cm 18/3 SJT |
| Dimensions (approx.) W x D x H: | 90mm (3.5”) x 200mm (8”) x 152.5mm (6”) |
| Weight: | 2.3kg (5.05 lbs) |
| Surface Resistivity: | 105-109 Ohms |
| Certification / Marking: | cTUVus, CE |
| Hand-piece Cable Length: | L=122cm (48″), burn resistant, ESD safe |
Handle and Workstand
| Tip-to-Ground Potential: | < 2 mV RMS |
| Tip-to-Ground Resistance: | < 2 ohms |
| Idle Temperature Repeatability: | +/- 1.1°C (2°F) in still air |
Handle Cord Assembly Length: | 122cm – burn proof, ESD safe |
| Connector 8-pin circular DIN | |
| Workstand W x D x H: | 100mm x 200mm x 100mm (4″ x 8″ x 4″) |
| Workstand Weight: | 0.69 kg (1.51 lbs) |
