PHN-3040

Preheat workpieces and supplement the insufficient heat of soldering iron

Features

-The entire PCB can be uniformly heated by Far Infrared heater.

-This is the most suitable preheater for lead-free solering.

-Temperature rise characteristics can be adjusted by setting temperature.

-By changing the position of stay bars, any types/shapes of PCB can be heated.

Usages

1. Preheating PCB having large heat loss patterns and components on it

2. Preheating multiple-layer PCB having through holes on it.

3. Preheating components which detest rapid temperature change

4. Assistance of detaching components while repairing.

5. Preheating PCB before flow/re-flow soldering.

6. Drying of pre-flux applied to the PBC.

Soldering Temperature Change with/without Preheating

Technical Specification

-Model No. : PHN-3040

-Input Voltage: AC-100V

-Power Cable: 2.0m with 3 pin plug

-Heating method: Far Infrared Radiation Method (Ceramic Heater)

-Temperature Control Range: Room Temperature~ 200°C

-Temperature Control Method: PID Control

-Environment: Temp:0~40°C ; Humidity: 35 8 5%RH

-Body Dimensions (mm)/ (W.D.H): 485 x 330x 40

-Usable Dimensions (mm) (W.D): 380 x 270

-Weight: 4.8kg

-Power Consumption: 1000W -Fuse: 10A