Complete Rework Station with Electric Pump
RMSE-2QE
Description
The quickest and safest solution for soldering and rework, also using Hot Air. It consists of stackable modules and all the necessary accessories to make your job easier.
The RMSE features all the Excellence range benefits. It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.
The DDE manages up to 2 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.
The MSE Electric Desoldering Module is indispensable for a complete desoldering process.
The JTSE Precision Hot Air Station controls the rework task using temperature and air flow profiles.
The RMSE works simultaneously with the DR560 Desoldering Iron, the T245 Handle and the JT-TA Heater Hose Set.
PRODUCT COMPOSITION
– 1 JTSE Hot Air Station
– 1 DDE 2 Tools Control Unit
– 1 MSE-A Electric Desoldering Module for DDE & DME
– 1 T245-A General Purpose Handle
(cartridge not included)
– 1 DR560-A Desoldering Iron
– 1 JT-TA Heater Hose Sets
– 1 AD-SE Stand for T210 & T245 Handles
– 1 DR-SE Stand for DR560
– 1 JT-SE Stand for JT heater
– 1 SCH-A Cartridge Holder
– 1 CL8499 Manual Tip Cleaner
– 1 JN2015 Nozzle for JT heater
– 1 JN2012 Nozzle for JT heater
– 1 JN2020 Nozzle for JT heater
– 1 T260-A Pick & Place
– 1 0008752 Extractor Desk
– 1 PH218 Thermocouple Type K
– 1 PH217 Kapton tape
Technical Specifications
Voltage: 230V
| Temperature (DDE) |
| 90 to 450 ºC / 190 to 840 ºF |
| Temperature (JTSE) |
| 150 to 450 ºC / 300-840 ºF |
| Air Flow (JTSE) |
| 5 to 50 SLPM |
| Operation modes (JTSE) |
| Heating / Profiles / Cooling |
| Vacuum (MSE) |
| 75% / 570 mmHg / 22.4 inHg |
| Flow rate (MSE) |
| 9 SLPM |
| Vacuum (JTSE) |
| 30% / 228 mmHg / 9 inHg |
| CONNECTIVITY |
| USB-B (rear) |
| Software PC / Traceability |
| USB-A (front) |
| Firmware update. |
| Soldering Graphics / Profiles management. |
| Robot |
| RS-232 remote control or Smart Fume Extractor connection |
| Type K thermocouple (JTSE) |
| Can be used both for Control and Protection purposes. |
| Pedal (JTSE) |
| Optional tool control |
| Aux (JTSE) |
| Peripheral expansion |
| Equipotential bonding |
| Optional connection to EPA |
| ESD/EOS |
| ESD safe |
| Tip to ground resistance |
| <2 ohms |
| Tip to ground voltage |
| <2 mV RMS |
| POWER SUPPLY |
| Peak Power (DDE) |
| 150 W per tool – 23.5 V |
| Peak Power (JTSE) |
| 700W |
| Ambient operating temp. |
| 10 to 50 ºC / 50 to 120 ºF |
| DIMENSIONS AND WEIGHT |
| Dimensions/Net weight |
| See individual modules |
| Package |
| 370 x 480 x 380 mm / 16.50 kg |
| 14.6 x 18.9 x 15.0 in / 36.38 lb |
