2 Tools DDE Station with Electric Pump
DDSE-2QC
Description
The DDSE station is a complete solution to rework circuits with T245 General Purpose Handle and DR560 Desoldering Iron.
The DDE Control Unit manages up to 2 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.
The MSE Electric Desoldering Module generates the vacuum needed to remove the molten solder from plated through holes and surface mount pads with the DR560.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.
It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.
With the practical Cartridge Holder SCH-A the different cartridges are always stored nearby.
PRODUCT COMPOSITION
– 1 DDE 2 Tools Control Unit
– 1 MSE-A Electric Desoldering Module for DDE & DME
– 1 T245-A General Purpose Handle (cartridge not included)
– 1 DR560-A Desoldering Iron
– 1 AD-SE Stand for T210 & T245 Handles
– 1 DR-SE Stand for DR560
– 1 SCH-A Cartridge Holder
– 1 CL8499 Manual Tip Cleaner
Technical Specifications
Voltage: 230V
| Selectable Temperature |
| 90 to 450 ºC / 190 to 840 ºF |
| Vacuum |
| 75% / 570 mmHg / 22.4 inHg |
| Flow rate |
| 9 SLPM |
| CONNECTIVITY |
| USB-B (rear) |
| Software PC / Traceability |
| USB-A (front) |
| Firmware update Soldering Graphics management |
| Robot |
| RS-232 remote control or Smart Fume Extractor connection. |
| Equipotential bonding |
| Optional connection to EPA |
| ESD/EOS |
| ESD safe |
| Tip to ground resistance |
| <2 ohms |
| Tip to ground voltage |
| <2 mV RMS |
| POWER SUPPLY |
| Peak power |
| 150 W per tool – 23.5 V |
| Ambient operating temp. |
| 10 to 50 ºC / 50 to 120 ºF |
| DIMENSIONS AND WEIGHT |
| Control Unit |
| 148 x 120 x 232 mm / 3.82 kg |
| 5.8 x 4.7 x 9.1 in / 8.41 lb |
| Package |
| 368 x 474 x 195 mm / 10.39 kg |
| 14.5 x 18.7 x 7.7 in / 22.91 lb |
