Convection Preheater
PHBE-2KA
Description
The PHBE is the best sollution for preheating big multilayer PCBAs, and it works with convection technology.
It allows to heat up gradually, reducing risk of thermal shock in the substratre and components, and to work with lower temperature on components connected to ground planes.
It features, along with the power and temperature mode, a powerful functionality of profiles to perform rework tasks. Temperature is sensed with an external thermocouple and the heat is autoregulated by the console, capable to store up to 25 different profiles.
Connecting up to 4 external TCs provides a high-precise close-loop control of the component/PCBA during the heating process.
It can also be used to protect a component or a specific area of the PCBA. It has 2 independent work zones that define a heating area of 180×277 or 360×277 mm (7.086×10.905 or 14.173×10.277 in).
PRODUCT COMPOSITION
– 1 PHBE HEATER UNIT
– 1 ACE-A Console
– 1 PHB-SA Convection Preheater Support
– 1 PH218 Thermocouple Type K
– 1 PH217 Kapton tape
Technical Specifications
Voltage: 230V
| Selectable Temperature |
| 50 to 250 ºC / 120 to 482 ºF |
| Heating area |
| 180 x 277 mm (7.1 x 10.9 in) – 1 zone |
| 360 x 277 mm (14.2 x 10.9 in) -2 zones |
| Temperature measurement |
| Thermocouple type K |
| CONNECTIVITY |
| USB-B (rear) |
| Software PC |
| USB-A (front) |
| Firmware update / Graphics management |
| Robot |
| RS-232 remote control |
| Aux |
| Console connection |
| Pedal |
| Connect a pedal to control the heater. |
| ESD/EOS |
| ESD safe |
| POWER SUPPLY |
| Maximum power |
| 1800 W |
| Ambient operating temp. |
| 10 to 50 ºC / 50 to 120 ºF |
| DIMENSIONS AND WEIGHT |
| Heater unit |
| 426 x 444 x 41 mm / 6.9 kg |
| 16.8 x 17.5 x 1.63 in / 15.4 lb |
