Maximum of 200sq cut and strip processing has been realized.
C378
Description
Such thick wires have been processed by hand in the field such as cubicle, elevator, power plants where they handle high voltage electrical power lines.
KODERA’S delicate technique and adventurous idea have accomplished a special machine for very large wires in diameter.
Technical Specification
| MODEL | C378 | |
| OUTER DIMENSIONS | W1,005mm ×D670mm ×H1,360mm | |
| WEIGHT | 590kg | |
| POWER SUPPLY | AC100V～AC240V（single phase）50Hz/60Hz | |
| POWER CONSUMPTION（100V） | 92W（Rated）560W（Max） | |
| AIR SUPPLY | 5Nℓ/min 0.5MPa※1 | |
| CUTTING LENGTH | 180mm～99,999mm | |
CUTTING TOLERANCES | ±（ 0.1＋0.0005×L ）mm※2 | |
| L : indicates a cutting length. | ||
STRIPPING LENGTH | FRONT END | 0.1～160mm |
| REAR END | 0.1～200mm | |
APPLICABLE WIRES | TYPE | Battery cable, W1, W2, VSF, IV, KV, UL, |
| Teflon , Glass Wire, etc | ||
| SIZE | 200sq～AWG#2（30sq）※2 | |
| O.D. | Max φ35mm※2 | |
| WIRE FEED SPEED | Variable | |
| CUTTER MATERIAL | Ultra fine particle alloy | |
| DRIVE SUPPLY | Stepping pulse motor / Air cylinder | |
Processing Capacity (Actual Data) <Number of Processed wires per hour>
| Total Length | Pieces |
| 500mm | 257 |
| 1000mm | 257 |
| 2000mm | 212 |
Processing Conditions:
Both ends stripping ： 20mm
Setting of speed ： 9
Wire ： WL1 38sq
