Description
The machine is applicable to screws of various specifications (M1.0 – M5.0). Fast and stable feeding can be realized just by making a simple adjustment to rails,which greatly reduces purchase cost. The machine is easy and convenient to use and it is worthy having.
-The design of separate rails makes it possible to draw out the rails to make adjustment freely,making it easy to operate.
-The patent design makes feeding fast and stable without screws being seized up.
-The feeding speed and charging speed of the machine can be adjusted freely according to the various operation requirements.
-The machine is in common use for special 1:1 short screws and screws with washers.
-Small size,occupying little space;and it is easy to move.
-The drives of feeding and shaking are controlled independently. Ideal time- lag shutdown time can be set freely. The machine can start the failure alarming function in case of abnormal conditions.
Technical Specifications
Diameter of Screw Thread: M1.0-5.0 mm
Material of Screw Head: Iron or the material which can be attracted by the magnet.
Length of Screw (Maximum): 20mm
Length of Screw (Minimum): Single screw: diameter x 1.0; Screw with spring washer; diameter + (0.5 x diameter): Screw with spring washer and flat washer: diameter + (1.1 x diameter)
Output Speed: 2 pcs/s
Protection/ Recovery Function: Overload protection circuit, reverse power polarity prevention circuit
Input Voltage: 12VDC
AC adaptor: Input: AC100-240V; Output: 12VDC
Dimension (mm): 185 x 130 x 150
Weight (kg): 1.80
Accessories: Operation manual: AC adapter: Hexagon wrench
