Microshot Needle Valves
TS5440
Description
The TS5400 Series Needle Valves dispense very precise deposits over a wide range of shot and bead sized due to a minimal dead fluid one. An external stroke control adjustment to fine-tune shot sizes. Easy to maintain, with little or no downtime. The compact design and easy-mount threaded hole allows for easy integration into automated applications.
The TS5440 Microshot Needle Valve, with its needle closing the fluid path directly on the canula inside the needle body, can dispense very precise deposits down to 0.0005 cm3.
The TS5440 Valve’s wetted parts include FDA-compliant 303 Stainless Steel. Recommended Controller: TS500R, TS350, TS250
Features:
-Precise and constant deposit sizes
-TS5440 delivers as little as 0.5 micro litre per deposit
-Zero “dead volume” when using TS5440
-TS5440 wetted parts include FDA-compliant 303 stainless steel
-Precise positioning of bent dispense tips due to design of material outlets
-Low maintenance design
Technical Specifications
| TS5440 | |
| Size Ø x H: | 1.12” x 5” (28mm x 127mm) |
| Weight: | 0.5lb (227g) |
| Fluid Inlet: | 1/8” NPT |
| Fluid Outlet: | Male Luer taper with locking cap |
| Mounting: | 10-32UNF |
| Maximum Fluid Pressure: | 100psi (6.9bar) |
| Minimum Operating Pressure: | 70psi (4.8bar) |
| Wetted part: | 303 SS, Teflon®, EPR |
| Cycle Rate: | Exceeds 400cycles/minute |
| Material Viscously Range: | 1 – 100,000cps |
| Warranty: | 1 year |
