| |
Casting C370 Option
|
|
| |
 |
CX-330
AUTOMATIC WIRE BUNDLING UNIT
Catches the rear end of wires processed by C370 Very quickly regardless of the wire length and contributes to increased productivity of wire processing. |
|
| |
|
|
| |
 |
CASY-637
AUTOMATIC WIRE TWISTING UNIT
Latest wire twisting technology has been built into a compact body suitable for use with C370. Adjustment of the twisting force, switching of normal (Z twisting) and reverse (S twisting) and adjustment of twisting start position can be made by one-touch command operation. Furthermore it can smoothly catch up with changes of wire thickness and/or feeding speed by the computer control system. It is a truly speedy, quiet and precise twisting unit.
|
|
| |
Casting C371 Option |
|
| |
 |
CX-333
AUTOMATIC WIRE CATCHER
Quickly catches the end of wires processed by C371, regardless of its length and contributes to efficient processing of wires. |
|
| |
|
|
| |
 |
CR-701
ROTARY CUTTER FOR SHIELD WIRES
AND COAXIAL CABLES
By using with Model C371, automation of triple step processing-length measurement, cutting and stripping of shield or coaxial cables, which used to be possible only by a semi-automatic or manual operation, has now been materialized. The computer control enables the rotary cutter to adjust itself up to a cable with maximum outside diameter of 8mm. Thanks to the dramatic improvement of operating efficiency, even one operator will be able to control four to five machines at a time. The CR-701 is entirely new product which materialized a combination of quality finishing and saving of manpower at the same time.
|
|
| |
|
|
| |
 |
CM-801A
MID STRIPPING UNIT
When combined with the Casting C371, automatic mid stripping is realized. CMS-801 can handle wires with an outer
diameter of up to 8mm. It can mid strip in up to 10 different positions on a single wire. Automation has been accomplished thus far by this revolutionary equipment.
|
|
| |
Common Accessories |
|
|
 |
CPF-05
PREFEEDER WITH SELF-LEARNING FUNCTION
Space reduction has been achieved by KODERA's unique space saving concept. Self-leaning function by means of double sensors and integrated computer will feed a wire to the machine neatly. It controls the slack of wire and unique wire straightener improve the products quality. Furthermore, the great value of the processing and high work efficiency are realized by high speed wire feeding performance (Max. speed 3.3m/sec.) |
|
|
|
|
|
 |
CPD-03
AUTOMATIC WIRE SUPPLY UNIT
The unit supplies the wire while straightening the wire from the bobbin. The speed is controlled automatically, so that smooth supply is ensured. |
|
|
|
|
|
 |
CC-100
WIRE COLLECTOR
Just set up CC-100 on the left side of the Casting Series, it carries the finished wire by belt-conveyor and deposit those wires neatly. It contributes to improving the work efficiency rate.
|
|
|
|
|
|
 |
CAS OP-3
AUTOMATIC WIRE FEEDER
An automatic wire feeder unwinds only required length of wire by the action of a rotation sensor. The built-in computer automatically controls the speed and the number of rotation in accordance with the speed of feeding. |
|
|
|
|
|
