| |
Technical Specification |
Optical |
- Twin Pupil Monoscopic, infinity corrected optical system utilizing patented Dynascopic Exit Pupil Expansion Technology
- Permanently engaged camera option ensures high resolution video / digitized images for automated measurement or image recording
- Pre-centered reticle to both eyes
- Custom design reticle option
|
Magnification |
- 20x total magnification standard with single. quick change, high numerical aperture objective
- 10x, 50x, 100x, 200x, 400x high numerical aperture objective options
|
Illumination |
- Surface Reflected (Standard)
- Shadow free 150W 6 point ringlight with fibre optic illumination (200 hours Iamplife)
- Surface Reflected (Options)
- 2 x 30W spot lamps with integral power supply (600 hours lamplife)
- Episcopic, through the lens 75W fibre optic illumination (200 hours lamplife)
- Substage Transmitted (Standard)
- Substage adjustable 75W fibre optic llumination (600 hours Iamplife)
|
Measurement stage Options |
- Displacement measurement against a head mounted crosslink reticle in X and Y (manual or motohsed stage)
- Differential focus Z measurement (manual or motorised)
- Video based edge detected n for automated X and Y measurement
- Autofocus for automated Z measurement
- Measuring range options:
- 400mm x 300mm (16" x 12”)*
- 300mm x 225mm (12” x 9” )*
- 200mm x 150mm (8”x 6”)*
- 150mm x 150mm (6” x 6")
- * available as manual or motorized stages
|
System Options |
The Hawk family is modular and flexible. Please see enclosed configuration sheet for the full range of system options |
Dimensions |
Dimensions will vary according to system configuration chosen.
- Minimum footprint is 600mm x 700mm x 400mm
- Maximum footprint is 700mm x 700mm x 650mm
|
Accuracy Statements |
A range of stage types can be used with Hawk, each type of different construction, complexity and size. This results in a range of repeatable measurement accuracies. |
|
Data Options |
- QuadraChek 200 series microprocessor with:
- Numerical & graphical display
- Multilanguage
- Parallel printer / RS232 port
- Non Linear Error Correction (pre installed)
- 2 or 3 axis
- Part programming
- Skew / datum
- QuadraChek 5000 Geometric Software
- PC & monitor
- Fully geometric & numerical display
- Multilanguage
- Manual or CNC motorized
- Non Linear Error correction (pre-installed)
- 2 or 3 axis
- Full tolerancing
- Part programming
- Full CAD in / CAD out (2D)
- Extensive reporting, data transfer & SPC capability
- Help & self teach functions
- Video Edge Detection (VED)*
- Autofocus*
- * only available with fully automatic system
|
Accessories |
- Digital video camera options
- Supplementary glare reduction hood for very bright environments
- Coloured filters for profile viewing
- Self calibration & certification grids with full instructions
|
| Weights |
|
| Lens Objective Table |
| Objective lens options available for all Hawk variants |
 |
| |
