Belt Feed has evolved the CASTING.
C385A
Description
It doesn’t damage the core wire since stripping is performed with special round blade and cutting of the wire is processed with V-blade all together.
Furthermore, belt feed system has actualized the stable length measurement because it can grasp the face of the cable whose surface is unlevel, which is often seen on cabtire cables or shield wires, etc.
Switching of the belt feeding by air control can be performed at the flip of a switch on the operation panel.
Technical Specification
| MODEL | C385A | |
| OUTER DIMENSIONS | W716mm ×D430mm ×H266mm | |
| WEIGHT | 44kg | |
| POWER SUPPLY | AC100V～AC240V（single phase）50Hz/60Hz | |
| POWER CONSUMPTION | 35W（Rated）139W（Max） | |
| AIR SUPPLY | 0.06Nℓ/min 0.5MPa※1 | |
| CUTTING LENGTH | 210mm～99,999mm | |
| CUTTING TOLERANCES | ±（ 0.1＋0.0005×L ）mm※2 L : indicates a cutting length. | |
STRIPPING LENGTH | FRONT END | MAX 1,500mm（ Need halh strip ）※2 |
| REAR END | MAX 210mm（ Need halh strip ）※2 | |
APPLICABLE WIRES | TYPE | ABS wire, Air bag wire, 2 core shield wire, VSF, IV, KV, UL, |
| Teflon , Glass Wire, etc | ||
| SIZE | AWG#7（10sq）～AWG#28（0.08sq）※2 | |
| O.D. | Max φ11mm※2 | |
| WIRE FEED SPEED | Variable | |
| CUTTER MATERIAL | Ultra fine particle alloy | |
| DRIVE SUPPLY | Stepping pulse motor / Air cylinder | |
When Stripping Length is Long | Processing Conditions | |
| Total Length | Pieces | Both ends stripping ： 100mm |
| 700mm | 891 | Half-strip length ： 50mm |
| 1000mm | 769 | Setting of speed ： 9 |
| 1500mm | 628 | Close time ： 0.1sec |
| 2000mm | 530 | Open time ： 0.1sec |
| 2500mm | 458 | |
| 3000mm | 405 | |
| 4000mm | 327 |
When Stripping Length is Short | Processing Conditions | |
| Total Length | Pieces | Both ends stripping ： 60mm |
| 500mm | 2,022 | Half-strip length ： 30mm |
| 1000mm | 1,263 | Setting of speed ： 9 |
| 1500mm | 918 | Close time ： 0.1sec |
| 2000mm | 726 | Open time ： 0.1sec |
| 2500mm | 598 | |
| 3000mm | 507 |
